A livable house certainly requires clean water pipes because it is one of the things that must be found in a house Planning for clean water installations can be made correctly according to technical requirements so that the process of distributing water for home needs can later run easily and effectively. Here are some important aspects in installing clean water pipes
In this section, it is mastering where clean water for your home needs will be supplied later. In general, the availability of adequate water sources for home needs is a PAM pipe network and groundwater.
After you determine the type of water source that is suitable, then you can plan the installation of water pipes more carefully. An example is: If you use a PAM water source, of course you will be given a distribution route from the pipes that have been provided by the PAM manager and you are prohibited from modifying the size of the pipes or changing them yourself.
Using groundwater in the sense of making your own wells and installing water pumps will make it easier for you to manage your water needs as long as the water source is always available and you don’t face drought.
There are 2 types of clean water pipe installation models that you can apply by familiarizing yourself with field conditions and the availability of budget funds. You can looking for many type of Pipe in plumbing supply near me.
This type of pipe installation is also known as a circular connection, meaning that all ends of the pipe are connected without breaking. The advantage is that it makes the water pressure stronger and when a water faucet is opened simultaneously it will get the same water discharge.
With a lower cost, if the installation of this type of water pipe is wrong in the planning, there will be many problems later in the day, such as different water debits between one faucet and another, and if there is a breakdown at a certain point, it will cause several distribution channels to fail. total without finding a water supply.
For the technical procedure for installing clean water lines, there are 2 methods to choose from, namely embedded and attached installations. For those that are embedded, of course it will look nicer because it is in the ground or room, but it is also always difficult if there are revisions or maintenance later.
1. PVC Water Pipe
Currently, the selection of materials for the installation of drains is very diverse, ranging from those made of metal (iron), PVC and the most expensive ones, which are made of stainless steel, which are considered to be very resistant to corrosion. Each of these materials also has advantages and disadvantages from a different technical point of view as well as getting used to the job position in the field or for other supporting procedures. You can find this type of Pipe in plumbing supply near me.
2. CPVC Water Pipe
CPVC (Chlorinated Polyvinyl Chloride) water pipe is a type of water pipe that has the advantage of heat resistance. This type of water pipe is very thick and has a good level of resistance to high temperature changes.
CPVC water pipes are able to withstand temperatures up to more than 1800° C, making them suitable for hot and cold water installations. CPVC water pipes, which are also known as schedule pipes, are usually orange in color. You can use CPVC pipes for hot and cold water installations in your bathroom.
3. PVC-O Water Pipe
PVC-O water pipe is a development of polyvinyl chloride material which is produced via the bi-axial method. With this method, the bonds between the molecules of the raw material become stronger, so that the resulting material becomes more elastic, thinner and more effective at holding water volume.
In addition, PVC-O plumbing has a lower fragility rate compared to its predecessors. This makes PVC-O plumbing considered better than ordinary types of PVC pipe. This type of pipe can also be an option for clean water, waste water, and rainwater channels. You can find this type of Pipe in plumbing supply near me.